Bio-Scouring Enzyme is developed for bioscouring process
of knitted natural cellulosic fibers. Bio-scouring is an enzymatic process that providing a milder
and gentler alternative method to traditional scouring. Coenzyme SPA-5 is liquid and alkaline pectinase
preparation. It is specially developed for bioscouring process of knitted
natural cellulosic fibers such as cotton, linen, hemp and blend. It removes
pectin and other impurities from cotton fibers without any degradation of the
cellulose, soften and eliminate cotton seed to optimize dyeing performance.
Coenzyme SPA-5 is a perfect substitution to the
traditional process of dyeing and finishing. It can replace the caustic soda,
bleaching stabilizer and other harsh chemicals, and Simplify the production
process, effectively shorten the processing hours. Decrease the TDS.COD.BOD
index in waste water.
Benefits:
This product should be stored in a cool and dry place in sealed container, avoiding insolation, high temperature and damp. The product has been formulated for optimal stability. Extended storage or adverse conditions such as higher temperature or higher humidity may lead to a higher dosage requirement.
Enzyme preparations belong to protein, which may induce
sensitization and cause anaphylaxis in sensitized individuals. Long-term
exposure may cause minor irritation for skin, eyes or nasal mucosa, so any
direct contiguity with human body should be avoided. If irritation or allergic
response for skin or eyes develops, consult a doctor.
Bio-Scouring Enzymes,Bio-Scouring Enzyme,Textile Bio-Scouring Enzyme,Best-Selling Bio-Scouring Enzymes Sunson Industry Group Co., Ltd , https://www.sunsonchinaenzymes.com
The nutritional value of coarse material is low. Feeding alone cannot meet the nutritional needs of beef cattle at each stage. It must supplement energy and protein, which are commonly referred to as concentrates. Under normal circumstances, concentrates account for less than 50% of the beef cattle diet, and due to the high concentrate density, small size, and heavy weight, it is not easy to mix with the coarse straw-based feed. Therefore, it is necessary to do clever feeding when feeding concentrates. Methods: (1) Feed the concentrate with wet and rough feed and mix it evenly, which is suitable for free feeding. (2) Feed the roughage first and then feed the concentrate. The fine material is sprinkled on the coarse material left in the tank and mixed well, so that the beef cattle eat the grass together. Applicable to less concentrated material conditions. (3) Feed the concentrate first, and then feed the coarse material after the cow finishes eating. This method can be used when the proportion of concentrated material is a little more than 30% of the whole diet.
The grain feeds are relatively solid. In addition to seed coats, barley, rice, oats, etc. are also coated with a hard shell, which needs to be processed to facilitate digestion. (1) Crushing: The most common method. Crush into 2 millimeters or so, the crushed too thin, dry feed is easy to worry about, life, to form a viscous mass in the gastrointestinal, unfavorable digestion. After the grain is crushed, it is mixed into a mixed concentrate and fed. (2) Flattening: Squeeze after cooking or cooking, which can increase the weight gain by 5% to 10%. (3) Soaking: 150 kg of water for 100 kg can make the feed soft and easy to digest. (4) Roasting: The starch in the feed can be converted into a paste to generate flavor and increase palatability. So that the beans feed to remove harmful ingredients, improve utilization. The general temperature is 150°C. Do not scorch. It's better to crush it after frying. (5) Germination: The grain can increase vitamin content after germination, and it is suitable for feeding adult bulls. (6) Saccharification: Add 2.5 times hot water to the ground seeds, mix well, and put it at 55-60°C to make the enzyme work. After 4 hours, the sugar content of the feed can increase to 8%-12%. Suitable for feeding fattening cows. (7) Feed granulation: The fine and coarse feeds can be crushed and then mixed according to the nutritional needs of the cows in a certain proportion. The special machines can be used to make granules, cakes, and blocks, which are suitable for feeding yaks and fattening cattle.
Improve handfeel and softness of fibers
No cellulose fibre damage and decrease the weight loss of the fibers
Water and energy saving
Environmental friendly without extensive use of harsh chemicals
Suggested solution combined with anti-pilling proces
Fattening beef cattle coarse feed fine material skillful feeding technology
The main raw material for beef cattle is straw, of which wheat straw, corn stalk and rice straw account for the largest proportion. This type of feed has low nutritional value, crude protein, and low digestive energy. The crude fiber content is as high as 30% to 40%, and the lignin content is 6.5% to 12.0%. After the cows have eaten, the emptying speed in the digestive tract is slow, they can't vacate the gaps, they eat less, and they affect rumination and digestion. Therefore, it must be processed and modulated. There are many methods of processing and brewing: Shorten the straw to 1.5 to 3 centimeters or pulverize, increase the contact area of ​​the rumen to the straw, reduce the volume, and increase the amount of feed and speed through the rumen. Straw crushing technology can be used to knead the straw into short filaments with good results. Straw crusher is currently being promoted in large quantities and is a good method for cultivating straw. The above-mentioned physical method of straw treatment is more effective in combination with ammoniating, silage, alkalizing, and microbial fermentation, and can increase the feed intake and the digestibility of organic substances by 10% to 25%.