The baler has become an important packaging equipment in today's packaging market. According to the different models of the baler, the maintenance and maintenance methods will be different, and the daily maintenance work of various types of balers will be strengthened. Will bring more convenience to production.

Analysis of some problems that are often encountered during the use of daily balers:

1. Before the baler is running, check the components of the strapping machine and the photocells, and ensure that the position of the reflector is correct. There should be no dust on the surface. If the position is biased, even if it needs to be adjusted, if there is dust. Need to be cleaned up.

2. Some parts of the screws that frequently occur displacement and mechanical movement are loose, if necessary, tighten. If there is a missing screw or nut, it needs to be replenished in time.

3. Before running the baler, it is necessary to check whether there are any foreign objects or foreign objects in the transmission rail, which must be removed in time. If there is dust deposit, you can use compressed air to clear the dust. For parts that are frequently displaced, see if you need to add lubricant.

4. When the power is turned on and the baler is found to be noisy and mechanically vibrated, the power supply and the machine should be turned off immediately, and the professional treatment of the relevant personnel should be sought to avoid damage to the internal parts of the equipment.

Strengthening the maintenance and maintenance of the baler in the daily process will make the baler maintenance work easier and the failure rate will be greatly reduced, which not only reduces the maintenance cost of the baler, but also does not affect the normal production and Packaging work brings greater benefits to the company.