The spring plowing production season is approaching, and tractors from all over the world must go down to the field to produce spring farming. In order to ensure the safe operation of the tractor spring plowing production, the agricultural machine operator should be proficient in the following safe operation skills:

1. Before the operation of Shimoda, the agricultural machine operator should carefully and carefully conduct a comprehensive physical examination on tractors and agricultural tools, plows, hoes and rotary tillers. That is, maintenance and overhaul, so that the technical situation is good, and it is invested in spring farming. Achieve high efficiency, high quality, low consumption and safety.

2. If the coulter shaft of the rotary tiller is entangled in the field green manure or debris, it should be removed in the case of engine stall to prevent accidents.

3. When the field is turning and turning, the tractor speed is slow. Do not use the walking tractor at the same time to make a sharp turn in the direction of the steering handle and the tail pedal. Failure to do so may result in a rollover accident.

4. When the tractor field operation is transferred through the field or ditches, the power of the rotary tiller should be cut off and the low-speed small throttle should pass slowly. In case of high field rafts or wide and deep ditch drains, it is necessary to dig low fills or bridges beforehand to confirm safety and pass again to prevent the occurrence of agricultural accidents.

5. When the tractor is working in the field, if there is a trap, do not increase the throttle. The mud under the wheels should be dug out, and the planks or stones should be laid and then opened.

6. When the tractor is working in the field, if the tail wheel pedal is used to assist the steering, the steering angle should not be too large to prevent the driver's foot from colliding with the rotary tiller coulter.