I. Technical points for planting pasture 1. The choice of land: The main choice of farmland is soil with rich soil, fertile soil, convenient drainage and irrigation, four-sided land, and mulberry orchard land. 2. Fine basement application of base fertilizer: the seeds of forage grasses are generally small in size. It is required that the soil be carefully planted before sowing, and sufficient nitrogen base fertilizer should be applied to facilitate the rapid and uniform seed emergence. 3. Seeding rate and sowing method: Grain pods: The general sowing rate is 50-100 grams, using seedling transplanting and sowing. When seedlings grow to 15-20 centimeters in height, the seedlings can be planted with a spacing of 1530 cm. Sorghum grass: 1.5-2 kilograms per mu. Drilling method is used. The spacing is about 40 cm. Chicory: 0.2-0.3 kilograms per mu, sowing, drilling and spreading can all be used. When nesting, the litter spacing is 1520 cm, 4-6 grains per litter, seedling height 8-10 cm, and 2-3 seedlings per litter are appropriate. Drilling time is 30 centimeters, sowing depth 2-3 centimeters. When sowing, open the small compartment, mix the seeds with fine sand and spread the seeds, cover 1 cm of fine soil. Mexican corn: 0.5 kg per mu. When nesting, each nest 2-3 tablets, nest row distance 5050 cm, sow depth 2 cm, can also be transplanted with film fertilizer nutrient nursery seedlings, the effect is better. Second, to strengthen field management: Adequate water and fertilizer is a key measure to give full play to the potential of high-quality forage grass production. Therefore, the field management of pasture should focus on the two links of water and fertilizer. Under normal circumstances, high-quality forage grass and wetlands are afraid of flooding, so we must drain water in a timely manner. After weeding, weeds and seedlings are removed in time. In addition, forage grass sensitive to nitrogen fertilizer, combined with irrigation and fertilization, can greatly improve the grass yield and quality of pasture. After emergence, apply fertilizer once. Third, the rational use: When the pasture grass to a certain height (usually 30-40 cm), you can start cutting the first time the grass. We harvest once every 20-30 days. The interval is too long, the crude fiber content of pasture is increased, and the amount of grass production is affected. Note: Keep a certain height after mowing to facilitate regeneration. Grain pods, Mexican corn leave 8-10 centimeters; Scotia grass stay 5-8 centimeters, chicory leaves 3-5 centimeters. Grass uses fresh grass for its highest nutritional value. When it is used up, silage and drying can be performed to meet the supply of pasture in the off-season. 5 Axis Cad Cam Dental Milling Machine is the champion in dental field. The Dental Milling provides dynamic flexibility with a built-in, 5-axis dental automation system and an "open" architecture that integrates with virtually any scanner and CAD/CAM software. This provides the user with the agility to produce a wide range of dental restoration components based on demand -- including crowns, bridges, abutments, implant-carried resorations. Plus, the JD-MT5 accommodates and supurbly machines a variety of dental materials including titanium, chrome-cobalt, zirconium and more! The JD-MT5 was developed specifically and exclusively for dental milling applications. All specifications from machine size to performance were designed for the efficient handling and milling of dental blanks (or material pucks). the the Cnc Dental Milling Machine will can satisfy all your need. Dental Milling,Cad Cam Milling Machine,5 Axis Cad Cam Dental Milling Machine,5 Axis Cad Cam Dental Milling Machine Shandong Carved Intelligent Technology Group Co.,Ltd , https://www.demetdent.com