FDA approves the first fully implanted continuous blood glucose monitoring system to be available for 90 days

<

Recently, the US FDA approved Senseonics' Eversense Continuous Blood Glucose Monitoring (CGM) system for patients over 18 years of age. This is the first CGM system approved by the US FDA to include a fully implanted, 90-day blood glucose sensor.

For people with diabetes, when the body does not have enough insulin, or if insulin is not used effectively, glucose can accumulate in the blood, and high concentrations of blood sugar can cause heart disease, stroke, blindness, kidney failure, and toes, feet, or legs. Amputation, therefore, as part of disease management, diabetics must regularly monitor their blood glucose levels, and most blood glucose sensors currently on the market require regular replacement of diabetes management accessories (usually every seven days) to ensure that the overall CGM system is normal. Running, such frequency replacement is extremely inconvenient for the patient.

It is understood that Senseonics' Eversense CGM system is a device that can continuously monitor the patient's blood glucose concentration by implanting the upper arm of a diabetic patient. The device contains a fluorescent polymer sensitive to blood glucose concentration, when the blood glucose concentration changes. The signal transmitted by the material changes and is transmitted in real time to the mobile device worn by the patient. The transmitter can also connect to the user's computer via USB to upload blood glucose history data. If the concentration is too high or too low, the device will alarm.

According to a previous clinical survey published by Senseonics, Eversense CGM showed strong accuracy during the 90-day continuous wear of diabetic patients. At the same time, in terms of safety, research confirmed that the use of implantable sensors is serious. The proportion of people with adverse events is less than 1%.

Virus Specimen Collection Tube

Inspection principle:
It can perform protein denaturation on fresh clinical virus samples to inactivate the virus, prevent secondary transmission of infection, and ensure the safety of transportation and testing personnel.
♣.Structural composition: Combination of cotton swab and transport medium (VTM).
♣. Product requirements:
The product should be airtight, avoid high temperature, avoid direct sunlight storage. It should be used in a clean, hygienic, pollution-free, and temperature-friendly environment.
♣, Storage conditions and validity period:
â‘ , the product should be stored in a clean, dry and ventilated environment,
②, the temperature is 5℃-35℃;
â‘¢, relative humidity <85%RH;
â‘£, product shelf life: 12 months.
♣. How to use
â‘  Before sampling, mark relevant information on the label of the sampling tube.
â‘¡. Sampling with the corresponding cotton swabs.
â‘¢ After the collection is completed, quickly put the cotton swab into the collection tube, break the part higher than the sampling tube, and tighten the tube cover.
â‘£. For the specific sampling method, please refer to the following:
a) Nasal swab Gently insert the sampling head into the nasal cavity, stop for a while and then slowly rotate to exit, immerse the collected specimen in the Xiangxiang solution, break the excess part and discard it, and tighten the sampling tube cover.
b) Pharyngeal swab: Wipe bilateral pharyngeal tonsils and posterior pharyngeal wall with the sampling head, immerse the collected specimen in the sampling solution, break off the excess part and discard it, and tighten the cap of the sampling tube.
c), Mycoplasma Chlamydia, Ureaplasma specimen collection
Male: Insert the sampling head into the urethra about 2cm and rotate, stay for a while and then exit, and immerse the collected specimen in the sampling solution.
Female: Wipe the mucus of the cervical orifice, insert the sampling tip into the cervical canal for 1-2 cm for sampling, immerse the collected specimen in the sampling solution, break off the excess part and discard it, and tighten the cap of the sampling tube.
♣. Precautions
1. After the virus is collected, the disposable sampling swab should be completely inserted into the preservation solution, so that the virus can be retained to the greatest extent possible.
â‘¡ The collected specimens must be sent for inspection in time.
â‘¢. It is forbidden to use products with damaged packaging and expired validity period to prevent pollution.
This single-use Virus Sampling Tube is used for in vitro diagnosis. It cannot be used for human or animal oral or external use. If swallowed, it may cause serious events; it is irritating to eyes and skin. If it is not splashed into the eyes, rinse with water.

Virus Sampling Tube,Virus Specimen Collection Tube,Viral Transport Tube,Saliva Virus Sampling Kit

Jilin Sinoscience Technology Co. LTD , https://www.contoryinstruments.com