How to install and debug the steam heating sandwich pot? After the steam heating sandwich pot is in the factory, how to install and debug it, what should you pay attention to during the debugging process? Below is Yachen Xiao Liu to solve for you. For the majority of users who use steam heating sandwich pots to understand. The precautions for the installation and commissioning of the steam sandwich pot are as follows: GMP ATS Injection, Tetanus Antitoxin, Tetanus Toxoid ,Tetanus Antitoxin Injection, Antitetanus, Refined Tetanus Antitoxinsupplier in China Tetanus Antitoxin,Tetanus Toxoid,Tetanus Antitoxin Injection,Antitetanus&Refined Tetanus Antitoxin FOSHAN PHARMA CO., LTD. , https://www.fspharmamedicine.com
1. When unpacking, check whether the product and the accessory are consistent with the packing list. If the product and parts are damaged during transportation, if there is any loss or damage, please communicate with the manufacturer in time.
2. The product has been tested before leaving the factory. The relative positions of all components have been installed and adjusted. The user generally only checks and does not disassemble it at will, so as to avoid improper adjustment of the new installation and affect the product performance.
3. This equipment does not need to be fixed, as long as it is placed on a flat concrete floor. 
4. After the equipment is in place, please complete the spare parts according to the “installation diagramâ€, and check whether the equipment is complete and flexible.
5. The drain pipe end should be equipped with a “steam blocker†(“hydrophobic deviceâ€) to save steam to avoid waste.
6. The power supply should meet the requirements of the agitating structure of the equipment. The equipment casing must be well grounded to avoid accidents caused by leakage. (This part is only available with agitation)
7. When installing, care should be taken to ensure that the inlet and outlet pipes are unblocked and there is no obstruction.