Hot air circulation oven works

The hot air circulation oven air circulation system adopts a fan circulation air supply mode, and the air circulation is uniform and efficient. The wind source is driven by a circulating air supply motor (using a non-contact switch) to drive the wind wheel through the heater, and the hot air is sent out, and then the air is taken into the air chamber through the air passage, and then the used air is sucked into the air passage to be recirculated as a wind source. Use for heating. Ensure indoor temperature uniformity. When the temperature value swings due to the action of the switch door, the air circulation system quickly resumes the operating state until the set temperature value is reached .

Hot air circulation oven

Hot air oven is suitable for baking chemical gas and food processing to be baked goods, ink curing, paint film drying, etc., widely used in electronics, motors, telecommunications, electroplating, plastics, hardware chemicals, instruments, printing, pharmaceuticals , PC board, powder, impregnation, spraying, glass, wood building materials, etc. precision baking, drying, tempering, preheating, shaping, processing, etc.; internal heat cycle, baked objects are evenly heated.

Hot air circulation oven technical parameters

1. Heating heat source: steam, electricity, far infrared, electric steam.

2, temperature: steam heating: 50-140 ℃, zui high 150 ℃. Electric and far infrared heating temperature is 50-350 °C .

3 , with automatic control system and computer control system.

4, the steam pressure used 0.02-0.8Mpa (0.2-8kgf / cm2).

5 , with electric heating according to type I calculation 15kw , practical 5-8kw / h .

6. Special requirements are indicated when ordering.

7 , the use temperature is greater than 140 ° C or less than 60 ° C , should be specified when ordering.

8 , the factory factory drying car, baking plate size uniform, can be interchanged.

9 , baking tray size: 460 × 640 × 45