How to water at different developmental stages of flowers

<

During the seedling period, the potted soil should be dry, as the saying goes “dry long roots and wet long leaves”. More water will cause seedlings grow longer.

Vegetative growth period

Watering is sufficient to flourish, otherwise the plants grow slowly. However, it is also impossible to blindly increase the amount of water and lead to potted soil water rot. The general principle of watering is to see dry see wet and dry and wet alternately in order to keep the top soil wet. The “dryness” mentioned here does not mean that the basin soil is completely free from any water, and it is unscientific to say that it is "dried until it sees water flowing out from the bottom hole." Because the soil is dry, there will be cracks between the pots and the soil. When the water is poured, the water will quickly lose a lot of cracks, obviously it will not be able to get through. In this case, it is necessary to loosen the soil and then water it directly or use a dipping method to supply water.

2. Reproductive growth period

When flower is transformed from vegetative growth to floral bud differentiation, if there is too much water or more nitrogenous fertilizer, the flower buds that have already formed will become leaf buds. Therefore, in the flower bud differentiation period, dehydration (control watering) can be used to restrain the shoots from becoming long. Promote flower bud formation. Such as Bougainvillea, plum blossom, Bitao, Magnolia, etc., in the 6 to 7 months, respectively, control of water 2 to 3 times, until the branches and leaves wilting and then watering, can effectively increase the flowering rate.

3. Flowering and fruit setting

Once the flower enters the stage of pregnancy bud and flowering, it consumes the most water, and the water can not be short. It can't make the shoots wilting, otherwise the flowering time becomes short and the flowering is bad. But not too much, especially not water, long-term water will lead to falling.

The above is a general rule, and the frequency of watering should also be flexibly controlled according to the local climate and environmental conditions at that time, such as the air humidity, the texture and size of the flowerpots, and the conditions of potted soil.

Mobile Type Halogen Operating Light


Halogen reflective Mobile Type Operating Light is widely used in various operation lighting occasions in hospital and clinics. 

Full close streamline lamp-body design of the  Halogen Shadowless Lamp  completely meets the demand of the sterilization and high standard of laminar flow purification in operation room.

Adopting more than 5280 slices of reflection mirror, guaranteeing 1200 mm lighting depth.

Lighting color of the  Halogen Surgery Light  is close to natural sunlight and helps the doctor to operate surger clearly and accurately.

The back-up bulb will start work within 0.2 seconds automatically in case the main battery is dead, ensuring the continuation of surgical operation. There's failure indication in the handle control panel to recommend the bulb to be changed after operation.

The detachable handle jacket can be used for high temperature (≤134℃) sterilized.

Digital-control circuit offers many functions:10 segment brightness selection, stepless lighting regulation, brightness memory, low voltage start-up and power on self test etc.

Life-span of OSRAM halogen bulb is up to 1500 hours. The bulbs can be changed easily.

High thermostability Germany ORSAM  lamp socket.

Balance arm can be optional Germany imported or domestic.

Mould Die-casting Eight edge type Revolving arm.

Product Images:

photobank (2)

photobank (1)



Types of the lamp domes have 500mm diameter dome and 700mm diameter dome for Choice


Full reflection-1

KYZF500 (2)


Certificates:

Crtificates of CE, ISO9001, ISO13485, CFDA are approved.

ccc



Our company

photobank (1)

Shangdong province is the main machinery production base in China. 

KANGERJIAN Medical Technology Co., Ltd. is a group of senior lighting  design expert and machinery manufacturing expert company with 20years experience and factory locating in the east city--the hometown of confucius--Qufu in Shandong province, China.

 

The Company has passed the ISO:9001:2008 quality system certification, ISO13485:2003 quality system certification, CE certification and CFDA certification, so that the enterprise management standards and product quality is relatively connected to expand the international market for enterprises to lay the foundation.

Our main products:  Operation Theatre Lights ,  Operating Room Lights , Double Dome Halogen Operating LightSingle Dome Halogen Operating Light LED Operating Light ,  Surgical Operating LED Light , Mobile Type Operating Light, Gynecology Examination Tables ,  Obstetric Delivery Bed ,  Electrical Gynecological Table ,  Obstetric Delivery Table , Delivery Examination Table , Electric Hydraulic Operating Table Electric Medical Operating Table ,  Manual Electric Operating Table , Surgical Table ,  Operating Table ,  Operating Theatre Pendants , icu tower crane in ICU room, LED Viewbox etc. professional medical equipment.

 

The quality of casting by me, the market led by me! Excellent from professional, KANGERJIAN people lead the new trend of medical equipment.

company

show


delivery

Mobile Type Halogen Operating Light

Mobile Type Halogen Operating Light,Mobile Operating Lamp,Halogen Operation Lamp,Halogen Clinics Operation Lighting

Shandong qufu healthyou Medical Technology co.,Ltd , https://www.kangerjian-medical.com