1. Specimen collection and pre-treatment:

1)Use clean, dry containers for specimen collection. Best results will be obtained if the assay is performed within 6 hours after collection.

2)Unscrew and remove the dilution tube applicator. Be careful not to spill or spatter solution from the tube. Collect specimens by inserting the applicator stick into at least 3 different sites of the feces to collect approximately 50 mg of feces (equivalent to 1/4 of a pea).

3)Replace the applicator back into the tube and screw the cap tightly. Be careful not to break the tip of the dilution tube.

4)Shake the specimen collection tube vigorously to mix the specimen and the extraction buffer.

 

2. Testing

1)Remove the test from its sealed pouch, and place it on a clean, level surface. Label the test with patient or control identification. To obtain a best result, the assay should be performed within one hour.

2)Using a piece of tissue paper, break the tip of the dilution tube. Hold the tube vertically and dispense 3 drops of solution into the specimen well (S) of the test device.

Avoid trapping air bubbles in the specimen well (S), and do not add any solution to the result area. As the test begins to work, color will migrate across the membrane.

3)Wait for the colored band(s) to appear. The result should be read at 10minutes. Do not interpret the result after 20 minutes. Note: If the specimen does not migrate due to the presence of particles, centrifuge the extracted specimens contained in the extraction buffer vial. Collect 100 μL of supernatant, dispense into the specimen well (S) of a new test device and start again, following the instructions described above.

 

 

1. Specimen collection and pre-treatment:

1)Use clean, dry containers for specimen collection. Best results will be obtained if the assay is performed within 6 hours after collection.

2)Unscrew and remove the dilution tube applicator. Be careful not to spill or spatter solution from the tube. Collect specimens by inserting the applicator stick into at least 3 different sites of the feces to collect approximately 50 mg of feces (equivalent to 1/4 of a pea).

3)Replace the applicator back into the tube and screw the cap tightly. Be careful not to break the tip of the dilution tube.

4)Shake the specimen collection tube vigorously to mix the specimen and the extraction buffer.

 

2. Testing

1)Remove the test from its sealed pouch, and place it on a clean, level surface. Label the test with patient or control identification. To obtain a best result, the assay should be performed within one hour.

2)Using a piece of tissue paper, break the tip of the dilution tube. Hold the tube vertically and dispense 3 drops of solution into the specimen well (S) of the test device.

Avoid trapping air bubbles in the specimen well (S), and do not add any solution to the result area. As the test begins to work, color will migrate across the membrane.

3)Wait for the colored band(s) to appear. The result should be read at 10minutes. Do not interpret the result after 20 minutes. Note: If the specimen does not migrate due to the presence of particles, centrifuge the extracted specimens contained in the extraction buffer vial. Collect 100 μL of supernatant, dispense into the specimen well (S) of a new test device and start again, following the instructions described above.

 

 

The Magnetic Separator is a machine to separate metals that contain magnet , such as iron pieces, soil blocks etc from materials like seed, grain, food etc.

We have three different types, the 5XCX series Magnetic Separator, Single Roller Magnetic Separator and Portable Magnetic Separator.

The 5XCX series Magnetic Separator has high magnet strength of 17000gauss, it can remove all magnet materials , for example, the soil blocks that contain magnet. It has one high strength roller with two normal rollers to drive one round belt, the grain will discharge into belt and spread on belt for sufficient processing, the magnetic materials and non magnetic materials will discharge from different outlet.

The Single Roller Magnetic Separator has one Magnetic Roller , magnet strength from 3000-8000guass. It is drived by electric motor, and has self-cleaning function.

The Portable Magnetic Separator is a portable type, without electric motor. It has one magnetic drum inside, when grain passing through it, the magnetic materials such as iron pieces will stick on the drum, so you need to clean it regularly. It can put on any machine or use independently, much convenient model.

Application: Seed Magnetic Separator, bean magnetic separator, Magnetic Separator Machine

Specification:

FAQ:

1.       How about payment terms?

Usually is 30%TT in advance, balance 70%TT before shipment. We also accept L/C at sight, Paypal, West Union, Money Gram etc.

2.       How long is the delivery time?

15 days after payment

3.       How about packaging?

We will pack machine into plywood box if ship by LCL. If ship by FCL, we will coat machine with plastic film and fixed well by belt fastener, strong iron wire and steel wedge etc.

4.       Is there any warranty?

Warranty is 1 year.

5.       Installation and commission?

We can send engineer to help installation and commissioning, but you should pay for visa, air tickets, salary and arrange food and hotel when our engineer in your country.

6.       Do you have some videos that will help us on assemble or run the machines?

Yes, we have videos on how to assemble and use our machines, will send you a CD when ship the machine to you.

Magnetic Separator

Magnetic Separator,Seed Magnetic Separator,Bean Magnetic Separator,Magnetic Separator Machine

SHIJIAZHUANG SYNMEC INTERNATIONAL TRADING LIMITED , http://www.seedgraincleaner.com