Cynomorium Songaricum,Cynomorium Songaricum Root,Boutique Cynomorium Songaricum ,Cynomorium Songaricum Bagged Lixian Spring Pharmaceutical Co., Ltd. , http://www.lxctyy.com
The correct use of the crusher
1. The crusher and power unit should be installed firmly. If the crusher is fixed for a long time, it should be fixed on the cement foundation; if the crusher is a mobile work, the unit should be installed on a stand made of angle iron, and ensure that the power machine (diesel or motor) and the pulverizer pulley Slots are in the same plane of revolution. 2. After the crusher is installed, check the tightening conditions of the fasteners. If loose, tighten them. At the same time to check the tightness of the belt is appropriate. 3. Before starting the crusher, first turn the rotor by hand to check whether the claws, hammers and rotors are flexible and reliable, whether there is a collision in the shell, whether the direction of rotation of the rotor is consistent with the direction indicated by the arrow, and the power machine and the crusher. Machine lubrication is good. 4. Do not change the pulleys easily to prevent the crushing room from exploding when the speed is too high, or the speed is too low to affect the working efficiency of the crusher. 5, after the start of the crusher should be idling 2 ~ 3min, no abnormal phenomenon after the feeding work. 6. Pay attention to the operation of the crusher at any time during the work, and feed the material evenly so as not to block the stuffy car, and not to overload the work for a long time. If any vibration, noise, excessive bearing and body temperature, external spray, etc., are detected, the machine should be shut down immediately for inspection. 7. Stop immediately when there is a blockage. It is strictly forbidden to use a stick or hand to feed or pull out the feed to be processed without stopping, so as to prevent the grinder from injuring the arm or damaging the parts.